Subscribe to the Podcast!

Glueing Up Panels - Part 2

Glueing Up Panels - Part 2

Today's podcast completes our look at glueing up panels. Along the way, I also review the new silicone glue brush available from Rockler Woodworking....

Podcast Formatted to work on most devices

[To Download the file to your hard drive, click on the above Link; Some user's may need to right click on the link and choose download file to save to your hard drive]

Glueing Up Panels - Part 1

Glueing Up Panels - Part 1

In this episode of the podcast, we turn our attention from properly milling panels, to the task of actually gluing them up. Along the way, we also discuss some of the benefits of the K-Body clamp and receive some important tips on glueing from none other than Marc Adams.


Podcast Formatted to work on most devices

[To Download the file to your hard drive, click on the above Link; Some user's may need to right click on the link and choose download file to save to your hard drive]

Preparing for a Glue Up

Preparing for a Glue Up

It's time to glue up my parts from last time to create bookmatched panels. Before we can do that, however, we need to prepare the rough parts in the machine room...


Podcast Formatted to work on most devices

[To Download the file to your hard drive, click on the above Link; Some user's may need to right click on the link and choose download file to save to your hard drive]

Cutting a Tenon - An Alternative Approach

Cutting a Tenon - An Alternative Approach

Today, I'd like to post a short video I shot at the Marc Adams School of Woodworking back in 2009 with instructor Chris Gochnour. Earlier in the podcast, we discussed cutting tenons on the router table, and now I'd like to follow up with an alternative method to accomplish the same task . Always remember, there's more than one way to accomplish any woodworking operation!


Podcast Formated to work on most devices

[To Download the file to your hard drive, click on the above Link; Some user's may need to right click on the link and choose download file to save to your hard drive]

Resawing Wide Panels, Part 2 - iWW09b

Resawing Wide Panels - Part 2

Today's episode completes our discussion of resawing wide panels on the bandsaw as we follow our rough flattened blanks through the machining processes at the jointer and the bandsaw to create the parts for 6 book-matched panels. Please stay tuned through to the end for some important podcast news!


Podcast Formated to work on most devices

[To Download the file to your hard drive, click on the above Link; Some user's may need to right click on the link and choose download file to save to your hard drive]

Tuning Up a Japanese Saw - iWW10

Enjoy this short with Marc Adams as he discusses tips for tuning up a japanese saw at the Marc Adams School of Woodworking. Read More...

Resawing Wide Panels - iWW09a

Its time to meet the Scrub Plane! Read More...